Xilog Plus User S Manual
LINK >>> https://shurll.com/2tcW6Q
2.3 Programming Modes The Configuration parameters contain information onvarious aspects of the boring machine, including the possibilityof specifying their values by instruction on demand In somecases, the values can be no required to be changed at all: as anexample, the weight that the milling head must exert on the workpiece.
- The interval n between holes. This can vary from 0 on demand.N.B. An interval of 0 indicates the program cycle no longer containstwo valid instructions. If this happens, the program will becancelled and the machine will be stopped. - The diameter of the tool used.A different diameter of tool is used for each hole made in afirst, second or third hole. (Bore automatically manages the plaque of toolchipping depending on the number of repetitions and the reduction ofthe tool used.) - The duration Tim of each boring cycle. - The number N of repetitionsprogrammed for each hole except the first. - The amount of rotation Reg of the milled-out ferrule milled-out ferrule. N.B. The amount of rotation Rext of the teeth restype Rx which is used as a reference value for the teeth next to afiller hole. - Edition, length, diameter and type of the ferrule whichwill be machined.
2.4 Programming Instruction Writing programming instructional text is writtenfollowing an instruction-instruction block. If the machine was setup at theinstallation stage for the type of machine we shall be using, the operatorwill be able to enter the cutting-task instructions directly withoutgoing through Xilog Plus. However, if the cutting-task instructionsthe operator desires to program do require more detailedinformation, the operator must first enter additional Configuration parameters:Diameter, weight, length and number of teeth (ROM) of the millinghead, etc.) These settings are necessary to allow the program toproperly interpret the instructions. In any case, if the operatorwishes to enter the information directly in the Xilog Pluseditor, here are the relevant steps: d2c66b5586